Top 10k strings from Projector 1 (1984)(McGraw-Hill Book Company UK).z80 in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Utilities & Educational / Sinclair ZX Spectrum - Utilities & Educational - [Z80] (TOSEC-v2007-01-01) /

Back to the directory listing

   2 PLAY THE TAPE
   2 GO TO start
   2 "projector1"
   1 USING YOUR OWN COPY SOFTWARE
   1 Printer   software and loader
   1 ? and then restart
   1 ;"WARNING"
   1 ;"STOP THE TAPE"
   1 ;"Restart with
   1 ;"Press ENTER to go on";
   1 ;"Press ENTER to go on"
   1 ;"PROGRAM LOADING":
   1 ;"IMPORTANT NOTICE"
   1 ;"ILLEGAL BAUD RATE - value must  be between 50 and 19200 baud.   Check your printer manual for   the required rate.":
   1 ;"CALL ADDRESS OUT OF RANGE":
   1 ;" the last  300 characters of the data area must not be used."
   1 ) LOAD """" CODE
   1 '''"You must now enter the correct  baud rate to suit your printer. Type in the number, and press   ENTER"
   1 '''"You have selected ";b$
   1 '''"If you wish to use your own
   1 '''"If you neglect this, the printersoftware may be overwritten by  data and cause the program to   lock when you try to use the    printer."
   1 '''"Baud rate set at ";b:
   1 ''"You have selected the ZX printeror the Alphacom 32 printer.
   1 ''"No printer required - press
   1 ''"In order to leave the maximum   amount of space for data storagePROJECTOR 1 uses the top of the data storage area for the
   1 ''"Enter the address from which    the COPY software is called (in decimal):"
   1 ''"Call address ";b
   1 '"press 'm' to return to the menu to change your selection."
   1 '"Use the 
   1 '"The high-resolution copy
   1 '"Program restarted - press 'm'   for the menu, or ENTER to load  the rest of PROJECTOR 1."
   1 '"Print software occupying the    printer buffer must not be used,as this area is used by
   1 '"Press ENTER to go on."
   1 '"Press ENTER to go on"
   1 '"Press 'y' to stop this program  to load your software, or ENTER to return to the menu."
   1 '"PROJECTOR 1 can be used with anyof several popular printer
   1 '"Other types of printer may
   1 '"Load your software using
   1 '"It is vital that this interface is connected to the computer. Ifit is not, PROJECTOR 1 may lock while running and cause the lossof your data. If the interface  is connected, press ENTER, if   NOT, then disconnect the power  from the computer, connect the  interface, and start again."
   1 "the ZX or Alphacom 32 printer."
   1 "the Tasman    interface."
   1 "the Kempston Einterface."
   1 "the Kempston  interface."
   1 "the Hilderbay interface."
   1 "Select the option you require bypressing the relevant number:"
   1 "Interface 1."
   1 " SELECTION OF PRINTER INTERFACE"
   1  this program with 
   1  suitable for your port - into   high memory."
   1  software is intended for use    with the Epson MX100 series
   1  similar system for making
   1  printers or those using a
   1  printer software. If you are notusing the printer software then the whole of the data area is   free. But as you have engaged   the printer software,";
   1  print driver software, you
   1  present in this program. In thiscase you can load your own copy software - which must be
   1  option to makeoccasional checks on free memoryand stop entering data when
   1  need different software not
   1  interfaces. This first part of  the program allows you to selectsuitable software."
   1  input it at this stage. The
   1  graphics copies."
   1  free memory gets down to 300."
   1  driver software must occupy not more than 256 bytes of high
   1  Press ENTER to go on, or 'm' to return to the menu to change    your selection."
   1  PROJECTOR 1 for data storage."
   1  ENTER to confirm, or press 'm'  to return to the menu to change your selection."
   1  1984 McGraw-Hill Book Company   (UK) Limited.
   1   ZX printer or Alphacom 32"''"
   1   Tasman"''"
   1   Sinclair Interface 1"''"
   1   Other print software
   1   NO PRINTER"''"
   1   Kempston port"''"
   1   Kempston E"''"
   1   Hilderbay"''"